WHAT'S HAPPENING NOW:
SUBSCRIBE TO MAGAZINE
Topics Magazine Find It EXHIBITORLIVE eTrak FastTrak CTSM Certification Awards News Advertise
Topics
Planning
& Execution
Planning
& Management
Show & Space
Selection
Booth
Staffing
Transportation
Logistics
Vendors
& RFPs
Case
Studies
exhibiting 101
 
Material Handling FAQs
Here are answers to the most commonly asked questions regarding material handling. By Betsy Earle
All due respect to Benjamin Franklin, but I believe there are three certainties in this world: death, taxes, and material-handling (aka drayage) fees. And like the former two, the latter is a complicated topic that is difficult to fully grasp. Here, then, are answers to the most frequently asked questions related to drayage that I receive from clients and newbie exhibitors. Before we go further, let me say that while the fundamentals of material handling are essentially the same across the industry, each event and venue may have unique practices and regulations. Therefore, I always recommend giving each show's exhibitor-services manual a careful read.

What are drayage fees used for?
Drayage is charged by the general service contractor (GSC) and covers the one-way cost of moving an exhibitor's freight off of its carrier's vehicle and to the booth space. I describe it as a one-way fee because technically it is only charged for inbound freight. Material-handling charges are used by the GSC to cover the cost of operating the advance warehouse and the venue's marshaling yard, the wages of the forklift operators and other laborers, the expense of owning and maintaining the forklifts themselves, and other show expenditures.

How is drayage calculated?
Material handling is billed by hundredweight, or CWT. (The letter C comes from the Latin word centem, which means "hundred.") What that basically means is that drayage is calculated by weighing each piece of freight and rounding that number up to the next 100 pounds. So 212 pounds is equal to 3 CWT, 489 pounds is equal to 5 CWT, etc. Unless an item is especially oversized, freight dimensions are usually not a factor when calculating drayage.

How your freight is packed will determine which CWT rate you are charged. Crated freight has the least expensive CWT because it is the easiest to store and move. Palleted freight is generally more expensive than crated, since it requires more care during unloading and transport. And then there are "special handling" items, which include anything needing additional time, equipment, or labor to move, e.g., an oversized piece of exhibitry, a tech-laden display, etc. Consequently, this freight is charged the highest rate per CWT. For example, at a recent foodservice expo, the rate for crated freight was $104.50 per CWT, while special-handling freight was charged $176.75 per CWT.


How will I be charged if I'm shipping multiple types of freight?
If your truck arrives with six crates, three pallets, and one special item, you'll likely see individual charges for these. But if your truck overwhelmingly comprises freight that falls under the umbrella of special handling, your one or two crates may be billed at inflated CWT rates. That is why I advocate for always knowing the types of freight you're bringing to a show, carefully reviewing your material-handling invoice, and pointing out any billing discrepancies to the appropriate GSC reps.

Can I get a material-handling discount on items I need to exhibit effectively, e.g., my company's large equipment?
This is an area of recent interest, due to the fact that material-handling fees add up so quickly and show management wants exhibitors to still be able to afford to bring their products to the exhibit hall. As such, certain items within the special-handling category are sometimes treated differently in regard to drayage. This is especially true at events where exhibitors show oversized machinery or distribute products. For example, at the Institute of Food Technologists Annual Event and Food Expo this year, food samples will be billed at $34.75 per CWT (with a 200-pound minimum), while drayage rates for other types of freight will run upwards of $70 per CWT.

If a show doesn't offer discounts on essential exhibiting items, it's worth contacting show management to ask for one. The worst-case scenario is that a rep will say no. And it certainly helps to band together with your fellow exhibitors and make your case to show management with a united front. Years ago, I joined a roundtable of equipment manufacturers/exhibitors at the National Restaurant Association Show. As a result of our meeting and discussions with show management, lower drayage rates were put in place for the exhibitors bringing heavy-duty equipment to the show floor.


I'm driving my exhibitry to the venue in a company van. How does material handling apply to me?
If you are delivering with a privately owned vehicle (POV), which typically includes cars, vans, and pickup trucks, most shows will offer cart-load service.

For a flat rate, material handlers will help you unload your freight onto a flatbed cart and bring it to your booth. There are restrictions to this service, however. At one recent show I attended, exhibitors were limited to two round trips, and any shipment larger than that was subject to regular material-handling charges.


Do drayage rates differ if I send my freight to the advance warehouse versus directly to the venue?
Material-handling fees are generally higher when shipping directly to the venue, as the demand for labor is high, resources are more scarce, and everyone is working on a tight time frame. However, shipping to the advance warehouse isn't automatically less expensive. The biggest determinant will be the show city itself. In a popular locale such as Las Vegas, advance warehouse options tend to cost less because GSCs have lots of space to store freight prior to the show. On the other hand, a few years ago one of my clients exhibited in Monterey, CA, and wanted to send freight in advance. Since Monterey is a bit off the usual trade show path and far from major airports, inexpensive storage is harder to come by. As a result, the GSC passed on its cost to rent space to the exhibitors, meaning that direct-to-site CWT rates were less costly.

What is the easiest way to reduce my material-handling invoice?
My best piece of advice is to consolidate your crates. Let's say you send two crates weighing 114 and 223 pounds in separate shipments. Assuming the drayage rate is $80 per CWT, your invoice will be $400 for 5 CWT. But if you're able to combine these shipments into one larger crate, your bill would be $320 for 4 CWT – an instant savings of $80.

Material handling is far from the most glamorous part of our industry, but by understanding how it works, you can more easily identify ways to curb its impact on your bottom line and allocate those funds to more worthwhile endeavors. After all, Mr. Franklin also said that "a penny saved is a penny earned." E



Betsy Earle, CTSM
managing director and founder of Event Driven Solutions LLC. Earle obtained her MBA at the University of Miami and earned her Diamond-level CTSM designation in 2018. Exhibiting101@exhibitormagazine.com

you might also like
courses

FIND IT - MARKETPLACE
Rental
CEP - Chicago Exhibit Productions, Inc.
Traffic Builders
Going Interactive
Light Boxes
Matrix Frame USA
Panel Clip Connectors
Norse, Inc.
>> More Products
 
Join the EXHIBITOR Community Search the Site
TOPICS
Measurement & Budgeting
Planning & Execution
Marketing & Promotion
Events & Venues
Personal & Career
Exhibits & Experiences
International Exhibiting
Resources for Rookies
Research & Resources
MAGAZINE
Subscribe Today!
Renew Subscription
Update Address
Newsletters
Advertise
FIND IT
Exhibit & Display Producers
Products & Services
Supplier to Supplier
All Companies
Compare
Jobs
Get Listed
EXHIBITORLIVE
Sessions
Certification
Exhibit Hall
Exhibit at the Show
Registration
ETRAK
Sessions
Certification
F.A.Q.
Registration
FASTTRAK
Locations
Certification
Registration
CERTIFICATION
The Program
Steps to Certification
Faculty and Staff
Enroll in CTSM
Submit Quiz Answers
My CTSM
AWARDS
Sizzle Awards
All-Star Awards
Exhibit Design Awards
Portable/Modular Awards
Corporate Event Awards
NEWS
Associations/Press
Awards
Company News
International
New Products
People
Shows & Events
Venues & Destinations
EXHIBITOR News
© Exhibitor Media Group | The Leader in Trade Show and Corporate Event Marketing Education 310 South Broadway, Suite 101, Rochester, MN 55904 | (507) 289-6556 | Need Help? Ask Scott